a-180-2-multi

Doepfer A-180-2 Multiple

$55.00

Minimal size, simple multiple

Two sets of three signal multipliers

Any signal input into the top input is duplicated to the three out puts below.

This is a passive design (requiring no power to run) thus a small drop in volume results.

For tasks requiring no drop in level, a buffered (powered) multiple is recommended

Like the A-185-2

 

Available on backorder

Product Description

Modules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can “multiply” any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Though these modules are very “primitive” they are required very often in patches (e.g. to distribute a clock signal or a control voltage). Within a big A-100 system sufficient multiples should be planned. The function of A-180-1 and A-180-2 is the same. The modules differ only in the front panel width.

 

For the distribution of control voltages used for pitch control of several VCOs the buffered multiple A-185-2 is recommended. This module has a built in buffer (and a lot of additional features like CV summing) that avoids small voltage losses that may be heard in pitch control applications.

 

For more detailed information please look at the English user’s guideA180_man.pdf

The A-180-1 front panel without printing is available as a spare part. It can be used e.g. for DIY modules or as a connection unit for other modules.

 

Width: A-180-2 2 TE / 2 HP / 10.0 mm
Depth: 10 (measured from the rear side of the front panel)
Current: 0 mA

Optimization WordPress Plugins & Solutions by W3 EDGE